If A Used Unit Comes From Another Multi System - Honeywell rapid eye System Administrator Manual

If A Used Unit Comes from Another Multi System

Fig. 10–6. Inputting a Previous Owner's System Password into the LVP Utility.
1. Create a site definition (see
2. Use View to run a
owner to obtain the unit's system password on the previous owner's system.
3. Having obtained that password, use Admin to update your site definition.
4. Click LVP (last valid password). A Match the Password at Unit dialog box appears. See figure
6, above.
5. Type the password obtained from the previous owner. For clarity, figure
character password; Honeywell does not recommend using one-character passwords.
6. Confirm the password.
7. Click Save and Close.
8. Using View, start a
Failure to run a Maintenance Session
If the site cannot be accessed, you have either:
Obtained an incorrect system password from the unit's previous Multi SA/owner.
Incorrectly typed the password in the LVP utility.
A Maintenance Session is being run by another user. Try to run a Live Session instead.
If the site is still inaccessible, contact Multi technical support, as explained in
on p. 22.
Document 800-02325 Rev A
07/08
Adding a Site on p. 23).
Maintenance Session. If an error message is produced, contact the previous
Maintenance Session, to register the site.
System Administrator Guide
10–
10–6 shows a one-
For Questions,
181