To Customize The Dial-Up Connection To An Alarm Station; Fig. 3-24. Customizing An Alarm Station's Telephone Number - Honeywell rapid eye System Administrator Manual

Preparation
An alarm station's telephone number in the site definition is a copy of the number in the alarm
station definition. Before customizing a dial-up connection, consider if the alarm station definition
is correct, as explained in
Dial-Up Connection to an Alarm

To Customize the Dial-up Connection to an Alarm Station

1. While creating or updating a site, select an alarm station.
2. In the Report Alarms to these Alarm Stations pane, click
to Call in Case of Alarms dialog box appears.
3. Modify the telephone number so that it is as one would dial it. You have the option of:
Removing/adding long distance country and area codes, or
Typing a prefix and commas, as needed to dial-out of a site's exchange.
4. Click Save and Close. The modified telephone number appears in the Connection Method
column in the Report Alarms to these Alarm Stations pane. An asterisk is added in parenthesis (*)
to the entry's display, to indicate customization.
5. Update security for the unit; see
Fig. 3–24. Customizing an Alarm Station's Telephone Number.
Document 800-02325 Rev A
07/08
Dial-up Connection to an Alarm Station
Station, p. 217.
Updating Security on a Multi-Media
System Administrator Guide
on p. 214, and Customizing a
. See fig. 3–24. The Update Station
Unit, p. 133.
49