Renaming A Rule; Rule Status: Icons - Honeywell rapid eye System Administrator Manual

Enhancing Video for Security
5. Log/ Alarm. You can customize the duration of a response and if the response is Logged or
Raises an Alarm. See
6. Schedule. You also have the option of selecting a schedule. See
Response
Flexibility of checklist
After selecting a rule, you can perform steps 4 to 6 of the
Response Schedule
that are taken as a Response. Figure

Renaming a Rule

1. Select a rule; then click the rule's name once again.
2. Type a name. Letters and numbers can be used, as can some punctuation. The same name
cannot be used for two rules.
3. Save the name. Either:
Press the Enter key
Click elsewhere in the View window
Switch to another Windows application.

Rule Status: Icons

As a rule is customized, its status is reported by one of five icons; see figure 7–10.
Fig. 7–10. Status Icons for a Response Rule.
Meaning of icons for the status of response rules
1. The rule can be edited; the operator needs to set a trigger or a response.
2. The operator has selected an empty schedule.
3. The rule is operational.
4. The rule is prevented from acting by a component that has been disabled—camera, PTZ, motion
or other.
5. The rule is disabled; there is no checkmark in the box.
114
Managing the Response to a
Rule, p. 115.
in any order. A rule lists the Events that Trigger a response and the Actions
Rule, p. 115.
Checklist for Setting a Rule in the
7–9 shows where and how to make a rule.
Assigning a Schedule to a