To Deny Access; Removing A User's Account; To Delete An Account Used Onsite, To Access Localview - Honeywell rapid eye System Administrator Manual

To Deny Access

Denying access to sites is a security measure that is used against an operator who must be
stopped from using Multi-Media units as soon as possible. The account data is preserved. For less
severe cases, removing an account may be sufficient; see
Denying access to all Multi-Media units: Admin
1. Using Admin, click the Users tab.
2. Double-click the name of the account in the User Name column.
3. Click the box next to Deny this account access to sites [...] so that it shows a checkmark.
4. Click Save and Close.
5. Update security at each site listed in the "User can access selected sites" list. To update security,
see Updating Security on a Multi-Media
Denying access to LocalView, onsite.
1. Using LocalView, click the Configuration tab.
2. Click the Users tab.
3. Select the account.
4. Click the box next to Deny Access so that it shows a checkmark.

Removing a User's Account

For Accounts created using Admin software, whether user management is local or central:
1. Using Admin, click the Users tab.
2. Select the user that you want to delete.
3. Do one of the following:
Click
Click Delete on the Actions menu.
Press the Delete key on the keyboard.
4. When you are warned that the user is about to be deleted, click Yes to continue or No to cancel. If
other accounts are based on the account, a message warns of the fact, offering the option to
proceed with, or cancel, the deletion of the account.

To Delete an Account Used Onsite, to Access LocalView

Local User Management
For accounts created using LocalView:
1. Using LocalView, click the Configuration tab.
Document 800-02325 Rev A
07/08
Unit, p. 133.
on the toolbar
System Administrator Guide
Removing a User's Account, p. 165.
165