To Change Long-Distance Prefixes - Honeywell rapid eye System Administrator Manual

Alarm station for many international units
If their are many international units reporting to an alarm station and they are all in the same
country, you have the option of changing the long distance prefixes for out-of-country and in-
country dialing. Figure

To Change Long-distance Prefixes

Fig. 11–11. International Prefixes for Use of Dial-up in Rapid Eye Software.
Long distance prefixes affect only connections from units to alarm stations. Connections from View
to units are not.
1. Click "Options" on the View menu in Admin.
2. As needed, type an in-country long-distance prefix or an out-of-country long-distance prefix in their
boxes. For example, figure 11–11, above, shows the prefix for the city of Kiev, in the Ukraine.
Foreign prefixes for alarm station dial-up vary depending on the country. Note also that commas
can be used to introduce a delay in the dial-up.
Creating extra alarm station definitions
The simplest solution when many international sites need customization is to create two (or more)
alarm station records that shuttle alarms to the same PC. For example: one record for international
sites in country "a", another for sites in country "b", as needed. You can then add whichever alarm
station is most appropriate for a site, on a site-by-site basis. To create alarm station records, see
Adding an Alarm Station: Name and
country, it is best to change the country code in the alarm station definition.
Document 800-02325 Rev A
07/08
11–10 shows the default prefix values.
Reports, on p. 209. When most units are outside the operator's
System Administrator Guide
221