[Motion] Group - Cisco WVC210 Reference Manual

Network Camera Configuration File Spec V1.03
Configuration File Format
Cisco Small Business Network Camera Exported CGI Commands

[MOTION] Group

Parameter
md_mode
md_point
md_switch1
...
md_switch4
md_name1
...
md_name4
md_window1
...
md_window4
md_threshold1
...
md_threshold4
Value and Description
Set motion detection. The choices are:
•
0 — Off
•
1 — Always on (Default)
Set the position of motion under PT mode. The format is
X,Y. See "Motion Detection Commands," on page 37
for more information.
•
The range of X is -63 to 63.
•
The range of Y is -36 to 28.
Set motion detection, per window. The choices are:
•
0 — Off
•
1 — On
Name of the motion detection area 1-4. Name can
include up to 12 ASCII characters.
The coordinates of motion detection window N (relative
to resolution 640x480). The format is X1,Y1,X2,Y2. The
range of X is: 0 to 639. The range of Y is 0 to 479. See
"Motion Detection Commands," on page 37
information.
Set the threshold of the motion detection window N.
The range is from 0 to 255.
A
for more
70