P/T Commands-Operator (For P/T Models, Wvc210 Only); Move - Cisco WVC210 Reference Manual

User-Level CGI Commands
P/T Commands—Operator (For P/T Models, WVC210 Only)
P/T Commands—Operator (For P/T Models, WVC210 Only)
NOTE
Cisco Small Business Network Camera Exported CGI Commands

Move

Method: GET
URL:
http:/<ip>/pt/ptctrl.cgi?mv=<direction>,<degree>,<speed>,<speed2>
Currently, the WVC210 cannot support speed parameters.
Parameters:
direction
degree
speed, speed2
Return: A 200 OK is returned to the web browser when this command is received.
U Move Up
D Move Down
L Move Left
R Move Right
UR Move Up-Right
UL Move Up-Left
DR Move Down-Right
DL Move Down-Left
H Move to Home (calibration HOME)
position
X recalibration
1-n Vertical/horizontal movement degree
1-10 Speed levels reserved for future use
2
16