Direct Pt - Cisco WVC210 Reference Manual

User-Level CGI Commands
P/T Commands—Operator (For P/T Models, WVC210 Only)
NOTE
Cisco Small Business Network Camera Exported CGI Commands

Direct PT

Method: GET
URL: http://<ip>/pt/ptctrl.cgi?position=<x-position>,<y-
position>,<speed>,<speed2>
Currently, the WVC210 cannot support speed parameters.
Move the center to (X, Y) position.
Parameters:
x-position
y-position
speed, speed 2
Coordinates:
The home (0, 0) position is located at the center. For example, at 640x480
resolution, the horizontal position, x, is expressed as an integer value from –319 to
319 and ascends from left to right. The vertical position, y, is expressed as an
integer value from -239 to 239 and ascends from top to bottom.
Return: A 200 OK is returned to the web browser when this command is received.
Horizontal coordinates (as follow)
Vertical coordinates (as follow)
Speed levels (reserved for future use.)
2
17