Set Motion Detection Settings - Cisco WVC210 Reference Manual

Admin-Level CGI Commands
Motion Detection Commands
Cisco Small Business Network Camera Exported CGI Commands

Set Motion Detection Settings

Method: GET
URL: http://<IP>/adm/
set_group.cgi?group=MOTION&<parameter>=<value>...
Please refer to "Set group parameters," on page
Parameter Value and Description
md_mode Set motion detection.
•
•
md_point The position of motion under PT mode. The format is X,Y.
The range is:
•
•
md_switch1 Set motion detection window, per window:
•
...
•
md_switch4
md_name1 Name of the motion detection area 1 - 4.
...
md_name4
md_window1 Set the coordinates of motion detection window N (relative
to resolution 640x480). The format is X1,Y1,X2,Y2. The range
...
of X is from 0 to 639. The range of Y is from 0 to 479.
md_window4
md_threshold1 Set the threshold of motion detection window N. The range
is from 0 to 255.
...
md_threshold4
0 = Off
1 = On
X= -63 to 63
Y= -36 to 28
0 = Off
1 = On
31.
3
40