Move To Home Position; Set Patrol; Clear Patrol - Cisco WVC210 Reference Manual

User-Level CGI Commands
P/T Commands (For Supporting RS-485 Device Models PVC2300 and WVC2300 Only)
Cisco Small Business Network Camera Exported CGI Commands

Move to Home Position

Move to the user-defined home position.
Method: GET
URL: http://<IP>/pt/ptctrl.cgi?cmd=goto_home
Return: A 200 OK is returned to the web browser when this command is received.

Set Patrol

Configure the patrol with a sequence of preset positions and a specific delay time
(up to 9 preset positions).
Method: GET
URL: http://<IP>/pt/ptctrl.cgi?cmd=set_patrol,<parameter>
Parameters:
parameter
Return: A 200 OK is returned to the web browser when this command is received.

Clear Patrol

Clear the patrol configuration.
Method: GET
URL: http://<IP>/pt/ptctrl.cgi?cmd=clr_patrol
Return: A 200 OK is returned to the web browser when this command is received.
Position and Delay Time for Patrol Action
Preset_name,Delay_time;Preset_name,Delay_time;...;Pres
et_name,Delay_time;
Preset_name The preset name in the "set_preset"
command.
Delay_time The delay time before the camera
goes to the next preset position (in
seconds).
2
23