Motion Detection Commands - Cisco WVC210 Reference Manual

Admin-Level CGI Commands

Motion Detection Commands

Motion Detection Commands
Cisco Small Business Network Camera Exported CGI Commands
You can configure motion detection in four specific areas. Each area can have its
own name and its own threshold setting. When the movement indicators exceed
the user-configured threshold, a motion detection event occurs. The following are
the definitions of the detected area coordinates.
•
The home (0, 0) position is located at the left-top corner.
•
The scale is for 640 x 480 resolution.
•
The horizontal position, x, is expressed as an integer value from 0 to 639 and
ascends from left to right.
•
The vertical position, y, is expressed as an integer value from 0 to 479 and
ascends from top to bottom.
3
37