Assembling Your Product - Breville Juice Fountain Plus JE98XL Instruction Booklet

ASSEMBLING YOUR BREVILLE PRODUCT PAGE HEADER.....
BEFORE FIRST USE
Before using your Juice Fountain™ Plus for
the first time, remove and safely discard
any packaging materials and promotional
stickers and labels.
Ensure the appliance is turned OFF and the
power cord is unplugged.
Wash the filter bowl surround, filter basket,
juicer cover, food pusher, pulp container and
juice jug and lid in warm, soapy water with
a soft cloth. Rinse and dry thoroughly. The
motor base can be wiped with a damp cloth.
Dry thoroughly.
1. Place motor base on a flat, dry surface
such as a counter-top. Ensure that the
motor base is turned OFF and unplug
the power cord.
2. Place filter bowl surround on top of the
motor base.
10
3. Align the arrows at the base of the
stainless steel filter basket with the
arrows on the motor drive coupling and
push down until it clicks into place.
Ensure the stainless steel filter basket
is fitted securely inside the filter bowl
surround and onto the motor base.
4. Place the juicer cover over the filter bowl
surround, positioning the feed chute
over the stainless steel filter basket and
lower into position.
ASSEMBLING YOUR BREVILLE PRODUCT PAGE HEADER.....
5. Raise the safety locking arm up and
locate into the two grooves on either
side of the juice cover.
The safety locking arm should now be in a
vertical position and locked into place on
top of the juice cover.
6. Slide the food pusher down the food
chute by aligning the groove in the food
pusher, with the small protrusion on the
inside of the top of the feed tube.
FOOD
PUSHER
GROOVE
SMALL
PROTRUSION
INSIDE FEED
TUBE
Continue to slide the food pusher down on
the feed chute.
11