Assembling Your Breville Product - Breville RM-800CPXL Instruction Booklet

ASSEMBLING
your Breville product

ASSEMBLING YOUR BREVILLE PRODUCT

ASSEMBLING THE CITRUS PRESS
1. Pull the Juice Press Arm up and
backwards, away from the Motor Base,
until fully extended.
2. Place the Juice Collector onto the Drive
Shaft on top of the Motor Base, ensuring
the Juice Spout fi ts into the semi-circular
groove at the front of the Motor Base.
3. Insert the selected Stainless Steel
Filter (pulp or pulp free) into the Juice
Collector, aligning the indent with
arrow in the bottom of the Filter over
the corresponding tab with arrow in the
Juice Collector. Use the Coarse Filter
for maximum pulp content in the juice.
4. Place the Juicing Cone onto the Drive
Shaft and press down lightly to lock the
Cone into position.
9