Toshiba Strata CTX Programming Manual page 86

System
109 Music on Hold
F
IELD
MOH/BGM #8 (RSTU)
MOH/BGM #9 (RSTU)
MOH/BGM #10 (RSTU)
MOH/BGM #11 (RSTU)
MOH/BGM #12 (RSTU)
MOH/BGM #13 (RSTU)
MOH/BGM #14 (RSTU)
MOH/BGM #15 (RSTU)
4-26
D
ESCRIPTION
Enter the RSTU equipment number to which MOH/BGM source #8 or #9~#15
are connected. Enter data as xxyyzz:
Example: If the MOH/BGM source should be a assigned to an RSTU in cabinet
5, slot 2, circuit 3; enter 050203.
A PDN can not be assigned to an RSTU equipment number if it is to be a MOH
circuit. If a PDN is assigned to the circuit that will connect to a MOH/BGM
source, you must first delete it using PRG201
Cabinet numbers:
CTX100: Select 01 for Base and Expansion cabinet.
CTX670: Select 01 for Base and 02~07 respectively for each Expansion
cabinet.
Slot numbers:
CTX100: Select 01~04 for Base slots and 05~08 for Expansion slots.
CTX670: Select 01~08 for Base slots and 01~10 for Expansion slots.
Notes
• A PDN can not be assigned to an RSTU equipment number if it is to be a
MOH circuit.
•
If a PDN is assigned to an MOH/BGM circuit, you must first delete the PDN
using PRG201
Strata CTX Programming - Part 2: CTX WinAdmin Programming 04/03