Toshiba Strata CTX Programming Manual page 337

Programs 303~315
(continued)
Button Sequence
309- Audio Day1/Day2/
05~07 Night Destination
Type
~ , n,
A7$ A7& Tƒx…
Audio Day1/Day2/
Night Destination
Digits
n1,
C‚yq
309- Data Day1/Day2/
08~10 Night Destination
Type
~ , n,
A7' A7  Tƒx…
Data Day1/Day2/
Night Destination
Digits
n1,
C‚yq
309-11 DNIS VMID Code
, n,
A7 C‚yq
309-12 DNIS Name
, n,
A7 ! C‚yq
Strata CTX Programming - Part 3:Telephone Button Programming 04/03
Value(s)
n = 1. No Data (default)
2. Dialing Digits
3. DISA
4. Built-in modem
5. Night Bell
n1 = Up to 32 digits
n = 1. No Data (default)
2. Dialing Digits
3. DISA
4. Built-in modem
5. Night Bell
n1 = Up to 32 digits
n = Up to 10 digits
n = Up to 16 digits
Telephone Button Programming
Summary
Select the Destination Type for Audio/Speech calls.
Enter the Destination Directory Number or Access Code. If Dialing
Digits is the Destination Type enter the Directory Number that the line
should ring. If the line should ring over external page, enter #31xx,
where xx is the external Page group number. If the default page
access code #31 was changed, use the new page access code as the
leading digits.
Line access codes and network routing numbers can also be entered
to route incoming calls back out to a public or private network number.
Select the Destination Type for Audio/Speech calls.
Enter the Destination Directory Number or Access Code. If Dialing
Digits is the Destination Type enter the Directory Number that the line
should ring. If the line should ring over external page, enter #31xx,
where xx is the external Page group number. If the default page
access code #31 was changed, use the new page access code as the
leading digits.
Line access codes and network routing numbers can also be entered
to route incoming calls back out to a public or private network number.
Enter the VM mail box number which should answer calls for this DID/
DNIS number.
Note This code is only sent if using SMDI VM integration in
Program 580, 01. This code will be replaced, after voice mail
answers, by the DTMF code set in Program 309, 15 DID/
DNIS DTMF VMID code - if programmed; therefore, if using
Program 309, 15 code, this VMID code is not necessary.
This mail box number will be sent to voice mail on a DID/DNIS call
that rings directly to voice mail; and, on a direct DID/DNIS call to a DN
that forwards to voice mail before it is answered by the DN.
If a DID/DNIS call is answered by a station and then transferred to a
DN that forwards to voice mail, this mail box number of the DID/DNIS
number or the forwarding DN's mail box number will be sent to voice
mail per Program 579, 01.
If this VMID code is not set, direct DID/DNIS calls will go to the VM
general greeting and DID/DNIS calls that forward from a DN to VM
will go to the DN's VMID mail box.
This Voice Mail box number is added to SMDI packets direct and
forwarded DID\DNIS calls to voice mail as explained above.
Enter DNIS name. DNIS names can be assigned from the CTX
WinAdmin (not from programming phones).
300 Series Programs
13-59