Toshiba Strata CTX Programming Manual page 418

System Error Codes
Station Programming Error Codes
Program Code
51
52
52
52
213
80
82
82
96
98
33
49
50
51
214 52
80
80
96
98
B-8
Sub-
FB
parameter
When setting an owner extension to the additional information
120
of CO, GCO, the said CO, GCO keys are not assigned to the
A7
130
Feature Buttons of the owner extension.
The Primary DN entered conflicts with an existing DKT
-
extension.
The secondary/PhDN entered cannot be registered. The
110
A7
number conflicts with an existing ISDN extension(s), etc.
120 The CO or GCO Owner DN entered does not exist.
A7
130
The specified Prime DN does not exist in the system.
A7
The additional information assigned to the Feature Button is

invalid.
- 120 The line number entered does not exist.
110 The allowable number of GCO, POOL or PhDn has been
130 exceeded.

140
The quantity of Flexible buttons programmed exceeds the
-
system's capacity.
The equipment number entered is out of the range.
A7 —A7'
The designated circuit is already in use.

Multiple DSSs cannot be assigned to the same Shelf/Slot/

Circuit.
The entered DN does not exist in the system (the entered
value conflicts with an existing extension number or

numbering plan).
The entered value conflicts with an existing numbering plan.

The designated Prime DN does not exist in the system.
A7
The designated PCB and extension combination is not
A7 —A7'
allowed.
The number of DSS consoles entered exceeds the system's
A7 —A7'
capacity.
The number of DSS buttons entered exceeds the system's

capacity. This error can occur with PB1~PB8
Error Descriptions
Strata CTX Programming - Part 4: Appendices 04/03