Toshiba Strata CTX Programming Manual page 368

Telephone Button Programming
600 Series Programs
Programs 650~660
Button Sequence
654-02 Digit Modification
Table
, n, ,
A7! C‚yq
655 Private Digit
Modification Table
Assignment
,
%$$ C‚yq
655-00 Private Digit
Modification Table
n,
C‚yq
655-01 Private Digit
Modification Digit To
Be Deleted
, n,
A7 C‚yq
655-02 Insert Leading Digits
, n, ,
A7! C‚yq
656 Node ID Assignment
,
%$% C‚yq
656-01 Primary Node ID
Primary Overlap
Code
, n,
A7 C‚yq
656-02 Node ID 2
Overlap Code 2
, n, , n1,
A7! Tƒx…
C‚yq
656-04 Node ID 3
Overlap Code 3
, n, , n1,
A7" Tƒx…
C‚yq
656-05 Node ID 4
Overlap Code 4
, n, , n1,
A7# Tƒx…
,
C‚yq C‚yq
13-90
(continued)
Value(s)
n = 0~64, 0 = delete
C‚yq
n = 1~64
n = 1~10, 0 = delete
n = Up to 23 digits
C‚yq
n = Up to 6 digits
n = Up to 4 digits
n = Up to 6 digits
n1 = Up to 4 digits
n = Up to 6 digits
n1 = Up to 4 digits
n = Up to 6 digits
n1 = Up to 4 digits
Enter the Digit Modification Table Number (1~64) to be used by this
route definition.
The Private Network Digit Modification table may contain up to 64
entries. Each entry specifies the number of leading digits to be
deleted from the dialed number and the dial string to be inserted as
leading digits. The inserted dial string may have up to 23 digits.
Enter the Private Network Digit Modification Table (1~64) to be
defined.
Enter the number of leading digits to be deleted (1~10).
Enter the leading digits to be inserted. A numerical string up to 23
digits.
Assigns up to 4 Network Node IDs to this node for processing
incoming network calls. Each Node ID has an overlap code. The CTX
will substitute the Overlap Code for the Node ID before processing the
call further. A Network Directory Number consists of a Node ID and
the desired extension in that node. Node ID must first be established
in CMD102.
Enter the Primary Node ID for this node. This Node ID identifies the
node for administration. Node ID must first be established in Program
102.
Enter the Overlap Code associated with the Primary Node ID. An
Overlap Code is the string of digits that will replace the Node ID for
further call processing.
Enter Node ID 2 for this node. Node ID must first be established in
CMD102.
Enter the Overlap Code associated with Node ID 2. An Overlap Code
is the string of digits that will replace the Node ID for further call
processing.
Enter the Overlap Code associated with Node ID 3. An Overlap Code
is the string of digits that will replace the Node ID for further call
processing.
Enter Node ID 4 for this node. Node ID must first be established in
CMD102.
Enter the Overlap Code associated with Node ID 4. An Overlap Code
is the string of digits that will replace the Node ID for further call
processing.
The privilege to pick a specified DN.
Strata CTX Programming - Part 3:Telephone Button Programming 04/03
Summary