Toshiba Strata CTX Programming Manual page 155

F
IELD
02 Protocol
03 ILG
04 OLG
06 Bearer Svc - Speech
07 Bearer Svc - 3.1 KHz
Audio
08 Bearer Svc - 7 KHz
Audio
09 Bearer Svc -
Unrestricted 64K
10 Bearer Svc -
Unrestricted 56K
11 Bearer Svc -
Unrestricted 2x64K
12 Outgoing B Ch Select
13 B Ch Selection
Strata CTX Programming - Part 2: CTX WinAdmin Programming 04/03
D
ESCRIPTION
Select the ISDN protocol. Only Bearer capabilities specified by the protocol can
be entered in this field. The Initial value for ISDN Protocol corresponds to
information set in the hardware level.
Possible values: Nat'l ISDN (default), ETSI, TTC or Nat'l ISDN Nortel
National ISDN = North America, ETSI = England and TTC = Japan.
ILG assignments must be made for basic ISDNs to process the calls being
received.
Possible values: 0~32 (CTX100), 0~50 (CTX670 Basic), 0~128 (CTX670 Exp),
(default = no value).
OLG assignments must be made for basic ISDNs to process the calls being
originated.
Possible values: 0~32 (CTX100), 0~50 (CTX670 Basic), 0~128 (CTX670 Exp),
(default = no value).
Enable speech capability. See
Possible values: Enable (default) or Disable
Enable 3.1 KHz audio capability. See
Possible values: Enable (default) or Disable
Enable 7 KHz audio capability. See
Possible values: Enable or Disable (default)
Enable one of the unrestricted capabilities. See
Possible values: Enable (default) or Disable bearer capabilities for the channel
group.
Possible values: Enable (default) or Disable
Select originating B Channel method.
Possible values:
•
Explicit – Channel is indicated, and no alternative is acceptable.
• Preferred – (default) Channel is indicated, and any alternative is acceptable.
•
Any Channel – Channel is indicated, and any channel is acceptable.
Choose Idle B Channel selection method.
Possible values: Forward Cyclic, Backward Cyclic, Forward Terminal or
Backward Terminal (default = Backward Terminal)
• Select Forward Cyclic (from lowest number to highest number of B-channel).
•
Select Backward Cyclic (from highest number to lowest number of B-channel).
•
Select Forward Terminal for the lowest numbered B-channel.
Select Backward Terminal for the oldest number B-channel. (The High-High B-
channel selection)
Table 6-7 on page 6-24.
Table 6-7 on page 6-24.
Table 6-7 on page 6-24.
Table 6-7 on
Trunks
ISDN
page 6-24.
6-23