Toshiba Strata CTX Programming Manual page 313

Programs 203~204
(continued)
Button Sequence
204-16 Text Message Display
, n,
A7 % C‚yq
204-17 Call History Memory
, n,
A7 & C‚yq
204-18 DTMF Back Tone
, n,
A7 ' C‚yq
204-19 Continuous DTMF
, n,
A7 ( C‚yq
204-20 Display Language
, n,
A7! C‚yq
204-21 Adapter
, n,
A7! C‚yq
204-22 Blind Transfer
, n,
A7!! C‚yq
204-23 Mail Box Selection
, n,
A7!" C‚yq
204-24 MIC Init. Value
, n,
A7!# C‚yq
204-25 Microphone
, n,
A7!$ C‚yq
204-26 Speaker Mode Tones
, n,
A7!% C‚yq
204-27 Ring Over Busy
Cycles
, n,
A7!& C‚yq
204-28 Attd Overflow Dest.
, n,
A7!' C‚yq
204-29 Trunk Test and Verify
, n,
A7!( C‚yq
204-30 Auto Line Hold
, n, ,
A7" C‚yq C‚yq
Strata CTX Programming - Part 3:Telephone Button Programming 04/03
Value(s)
n = 1. Immediate
2. Not Immediate
n = 0~100
n = 1. Continuous
2. Not Continuous
n = 1. English
2. British English
3. French
n = 1. None
2. BPCI
3. BATI
n = 1. Leave
2. Separate
n = 1. Auto
2. Manual
n = 1. On
2. Off
n = 1. Enable
2. Disable
n = 1. Yes
2. No
n = 1. Two Cycles
2. Continuous
n = Up to 32 digits
n = 1. Yes
2. No
n = 1. Enable
2. Disable
Telephone Button Programming
Summary
Select whether to display an LCD text message.
• Immediate - displays the message.
•
Not immediate - does not display the message.
Enter the number of calls to be stored in memory for this station.
Not Used, has no effect on system operation
Enable / Disable Continuous DTMF.
For each iES32 PDN, set to "not Continuous", if set to "Continuous",
outdial notification to pagers and calls to AMIS nodes will not function
properly.
Possible values: Enable, Disable
Select the LCD Display Language.
Select the Adapter Type (Desktop OAI or Attendant Console).
•
None (default), BPCI or BATI
•
BPCI – for USB interface.
•
BATI – for PC Attendant Console Interface.
Set Blind Transfer Action (Attendant Type Only).
Select the method to enter the destination Mailbox for Call Recording.
If set to "Auto" CTX uses the VM ID of the station initiating the record
function.
Notes
• The DN assigned as the MSG center in PROG 200 is used to call
the VM port or Hunt group (PROG 200 FK 22).
• When set to "Auto" the VM-ID of the station initiating the record
function is sent to Stratagy ES as the destination mailbox.
•
When set to "Manual Input" the user may enter any valid Mailbox
followed by the "#" sign. If the user Presses "#" without additional
data the CTX will send the VMID of the originating station.
Turn on the microphone automatically when making a speaker phone
call. The microphone must be enabled.
Enable microphone.
Enable telephone to receive Call Waiting (Camp-on) and Ring Over
Busy Tone while on a speaker phone call.
Set ROB to ring two times or continuously.
Note See PRG200, 26 to enable ROB to be sent to individual
telephones.
Select overflow destination for attendant.
Allow Trunk Tests and Verification.
Enable Automatic Line Hold. This parameter allows a station to "line
hop" from one call to another automatically by placing the first call on
hold.
200 Series Programs
13-35