Toshiba Strata CTX Programming Manual page 334

Telephone Button Programming
300 Series Programs
Programs 303~315
Button Sequence
304-24 Change COS
Override Code
, n,
A7!# C‚yq
304-25 Register Speed Dial
Codes
, n,
A7!$ C‚yq
304-26 Originator Invoke
OCA
, n,
A7!% C‚yq
304-27 Senderized Tone
Mode
, n,
A7!& C‚yq
304-28 Emergency Call
Group
, n, ,
A7!& C‚yq
305 ILG Delete
,
"$ C‚yq
305-00 ILG Number
n, ,
C‚yq C‚yq
306 Outgoing Line Group
Assignment
,
"% C‚yq
306-00 Group Number
n,
C‚yq
306-01 Group Type
, n,
A7 C‚yq
306-02 Trunk Type
, n,
A7! C‚yq
306-03 Service Type
, n,
A7" C‚yq
306-04 GCO Key1 Number
, n,
A7# C‚yq
306-06 Pooled Key1 Number
, n,
A7% C‚yq
306-07 Pooled Key2 Number
, n,
A7& C‚yq
306-08 COS
, n, , n,
A7' Tƒx…
, n,
Tƒx… ÃC‚yq
13-56
(continued)
Value(s)
n = 1. Enable
2. Disable (default)
n = 1. Enable
2. Disable (default)
n = 1. Enable
2. Disable (default)
n = 1. Dial Tone (default)
2. Entry Tone
3. Silence
n = 1~8
(default = 1)
C‚yq
n = 1~32 (CTX100)
1~50 (CTX670 Basic)
1~128 (CTX670 Exp.)
n = 1~32 (CTX100)
1~50 (CTX670 Basic)
1~128 (CTX670 Exp.)
n = 1. Analog (default)
2. ISDN
n = 1. CO (default)
2. Tie
n = 1. Standard (default)
2. QSIG
n = 0~32 (CTX100)
0~50 (CTX670 Basic)
0~128 (CTX670 Exp.)
(default = 0)
n = 0~32 (CTX100)
0~50 (CTX670 Basic)
0~128 (CTX670 Exp.)
(default = 0)
n = 0~32 (CTX100)
0~50 (CTX670 Basic)
0~128 (CTX670 Exp.)
(default = 0)
n = 1~32
(default = 1)
Ã
Enable authority to change COS Override Code.
Enable authority to create system speed dial codes.
Enable authority for the originator of a call to invoke OCA when
encountering a busy station.
Send DTMF tones as a complete number rather than digit-by digit.
Used to enable E911 calling across a QSIG network. The QSIG ILG
is assigned to an Emergency Call Group in the same way a station is
in Program 200 FB17. Without this assignment, the call will not
attempt to complete to one of the trunks in the Emergency Group and
will result in an abandoned call. See Program 550
Emergency Call Group"
This command deletes Incoming Line Groups.
Enter the ILG number to delete.
OLG is a line selection feature which enables the use of external trunk
or private line groups for outgoing service. Assign and configure up to
128 OLGs (the same line can be placed in an OLG and an ILG).
Enter the OLG Group number.
Select the OLG Type.
Select the Trunk Type.
TIE Trunk Service Type.
Select the first GCO Key Group number.
Select first Pooled Line Key Group number.
Select second Pooled Line Key Group number.
Select Day 1, Day 2 and Night Values.
Strata CTX Programming - Part 3:Telephone Button Programming 04/03
Summary
"Enhanced 911
on page 13-85.