Toshiba Strata CTX Programming Manual page 419

Program Code
33
33
48
49
49
49
49
215
51
51
51
52
52
52
80
82
82
96
98
Strata CTX Programming - Part 4: Appendices 04/03
Sub-
FB
parameter
100 The sub-parameters for Key Number field must be assigned.
110
120
A7
130
140
The line number entered is out of range for the system's
- 120
capacity.
Essential sub-parameter values must be entered.

Two or more PhDNs with the same value are registered to one
110
A7
extension.
700 The feature code(s) allowed to attendant console only is
790 registered.
800
A7
810
820
830
Two or more DSSs with the same value are registered to one
610
A7
extension.
120 The entered DN does not exist in the system.
130
A7
560
610
The Primary DN entered conflicts with a value of an existing
numbering scheme.
The secondary/phantom DN entered cannot be registered.
110
A7
The number conflicts with an existing number scheme.
When setting an owner extension to the additional information
120
of CO, GCO, the said CO, GCO keys are not assigned to the
A7
130
Feature buttons of the owner extension.
The Primary DN entered conflicts with an existing DKT
-
extension.
The secondary/PhDN entered cannot be registered. The
110
A7
number conflicts with an existing ISDN extension(s), etc.
120 The CO or GCO Owner DN entered does not exist.
A7
130
The specified PrimeDN does not exist in the system.
A7
The additional information assigned to the Feature Button is

invalid.
- 120 The line number entered does not exist.
The allowable number of GCO, POOL or PhDn has been

exceeded.
The number of Flexible buttons programmed exceeds the
-
system's capacity.
Station Programming Error Codes
Error Descriptions
System Error Codes
B-9