Toshiba Strata CTX Programming Manual page 412

Digital business telephone systems
Hide thumbs Also See for Strata CTX:
Table of Contents

Advertisement

System Error Codes
System Programming Error Codes
System Programming Error Codes
Program
Code
33
33
49
49
49
49
100
50
50
50
50
33
49
102
51
52
103
104
33
105
49
49
106
33
107
96
B-2
Sub-
FB
parameter
A7
A7
A7
A7
A7
A7
A7
A7!
A7"
A7#
A7
A7!
A7
A7
-

-

A7! —A7!!
A7 !
A7 '
A7! —A7!!
-

A7—A7
A7 —A7!
Error Descriptions
The entered Cabinet/Slot value is out of range.
The entered PCB Type is out of range.
Deleting a Card (000) – Programmed station and/or trunk data
must be deleted before a card can be deleted.
Changing Card Type Code – Card Type cannot be changed.
Delete the existing Card Type before entering a new Card
Type.
The designated BIOU is already in use.
The PCB cannot be assigned to the designated equipment
position.
One of the required parameters (PCM Highway, BDKU Type
or TEI Assignment) has not been assigned.
The PCM highway value entered is not applicable for the
desired PCB assignment. PCB parameters are required for
PDKU or BDKU, RDTU, RDSU, RPTU.
The Channel Type value entered is not applicable for the
desired PCB assignment. PCB parameters are required for
PDKU or BDKU, RDTU, RDSU, RPTU.
The TEI Type value entered is not applicable for the desired
PCB assignment. PCB parameters are required for PDKU or
BDKU, RDTU, RDSU, RPTU.
The entered Feature Code is out of range.
An invalid OLG number was entered in OLG Number field
when assigning a Flexible Numbering Feature code of 551.
Flexible Numbering Plan values cannot be repeated. The
value entered cannot be registered (e.g., If 1234 is registered,
123 cannot be registered).
The value entered conflicts with an existing extension and
cannot be registered.
See
"Common Error Code Table"
See
"Common Error Code Table"
The entered Clock value is out of range.
The BIOU general relay number value conflicts with existing
parameter assignments.
The entered circuit number is not the clock source port.
See
"Common Error Code Table"
The entered Pad device number is invalid.
The number of Pad groups exceed the system capacity.
Strata CTX Programming - Part 4: Appendices 04/03
on
page
B-1.
on
page
B-1.
on
page
B-1.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Strata ctx100Strata ctx670

Table of Contents