Toshiba Strata CTX Programming Manual page 417

Program Code
49
50
51
209
52
80
96
51
52
210
80
96
33
33
48
49
213 49
49
49
51
51
Strata CTX Programming - Part 4: Appendices 04/03
Sub-
FB
parameter
If Hunt Method field is set to Distribute, the incoming
A7
destination Pilot Number must be assigned.
If Hunt Method is set to Distribute, Pilot Number must be
A7!
assigned.
The entered value conflicts with an existing number or
A7!
numbering plan.
The entered value conflicts with an existing DKT extension.
A7!
The designated Hunt Group number does not exist in the
A7
system.
The assigned Hunt Group number, exceeds the system
A7
capacity.
The entered DN does not exist in the system (The entered
A7
value is used in an extension number or numbering plan).
The entered value is used in the numbering plan.
A7
The entered Prime DN does not exist in the system.
A7
The Pickup group number entered is out of the range for the
-
system's capacity.
100 The sub-parameters for Feature Code (Key Number) must be
110 assigned.
120
A7
130
140
The line number entered is out of range for the system's
- 120
capacity.
Essential sub-parameter values must be entered.

Two or more PhDNs with the same value are registered to one
110
A7
extension.
700 The feature code(s) allowed to attendant console only is
790 registered.
800
A7
810
820
830
Two or more DSSs with the same value are registered to one
610
A7
extension.
120 The entered DN does not exist in the system.
130
A7
560
610
The Prime DN entered conflicts with a value of an existing
-
numbering scheme.
The secondary/PhDN entered cannot be registered. The
110
A7
number conflicts with an existing number scheme.
Station Programming Error Codes
Error Descriptions
System Error Codes
B-7