Bosch DCN Next Generation Operation Manual page 242

242 en | Operation
When a fault condition is resolved, the fault message will disappear. The messages CobraNet:
0xHH, Internal: Mute, Internal: 0xHH, Internal: Fatal, and No network go out of view when you
push the knob.
Fault status
Use the 1 Fault Status menu item to see condition messages of the cobranet interface. If there
is more than one message, the display shows the most important message.
Messages
No Fault
Max. CH mismatch
CobraNet: 0xHH
Internal: Mute
Internal: 0xHH
Internal: Fatal
No network
Table 8.18: Messages (low to high importance)
2013.11 | V2.0 | DCN-NG_OM_V4.x
Description
The cobranet interface operates correctly.
You have attached an audio input or audio output to a channel
that does not exist.
The CobraNet module has a buddy link error. 0xHH is the
hexadecimal error code. Refer to the CobraNet documentation on
the DVD that was supplied with your system for more
information.
All audio inputs and audio outputs are muted.
The CobraNet module has a fault or an error. 0xHH is the
hexadecimal error code. Refer to the CobraNet documentation on
the DVD that was supplied with your system for more
information.
The cobranet interface cannot start the firmware.
The cobranet interface cannot find the optical network.
Operation Manual
Conference System
Bosch Security Systems B.V.