Bosch DCN Next Generation Operation Manual page 156

156 en | Connection
10 - 40 V(DC)
Figure 6.60: Power supply
A
B
Figure 6.61: Power supply
Remote Controls
You can use the parallel inputs and parallel outputs as remote controls. For example, to switch
on lamps, open doors or close curtains in the room.
Notice!
The parallel inputs and parallel outputs are also available on a 20-pole connector.
All parallel inputs and parallel outputs form pairs. For example, parallel input U00 controls
parallel outputs D00.
2013.11 | V2.0 | DCN-NG_OM_V4.x
GND
Operation Manual
J10
J10
Conference System
Bosch Security Systems B.V.