System Operation Dcn-Wireless; Start The System - Bosch DCN Next Generation Operation Manual

Table of Contents

Advertisement

230
en | Operation
8
Operation
8.1

System operation DCN-Wireless

8.1.1

Start the system

Before starting the system, make sure that:
Notice!
If you want to use the wireless discussion unit in a new system, but it is already subscribed to
another system, you must de-initialize the unit. After the unit has been de-initialized it must
be subscribed to the new system.
To start the system, do the following:
1.
2.
3.
If the software version of the wireless discussion unit is lower than 2.35, do the following:
1.
2.
3.
2013.11 | V2.0 | DCN-NG_OM_V4.x
The system is correctly installed.
The required number of wireless discussion units have been subscribed.
Push the on/off switch on the central control unit. The display comes on. All devices in
the DCN and optical network (including the WAP) are activated.
Install the battery packs in the wireless discussion units.
Push the microphone buttons on the wireless discussion units to activate the wireless
discussion units. The LED around the microphone button comes on as yellow for 250
milliseconds
If all LEDs of the wireless discussion unit are off, the wireless discussion unit is activated,
and ready to use.
If the LED around the microphone button stays on yellow, and the indicator ring of the
microphone comes on red, the wireless discussion unit cannot find the subscribed
wireless network. If the wireless network is found within 15 minutes, the wireless
discussion unit connects. If not, the wireless discussion unit automatically deactivates.
Push the on/off switch on the central control unit. The display comes on. All devices in
the DCN and optical network (including the WAP) are activated.
Install the battery packs in the wireless discussion units.
Push the microphone buttons on the wireless discussion units to activate the wireless
discussion units. The LED around the microphone button comes on as green for 2
seconds
If all LEDs of the wireless discussion unit are off, the wireless discussion unit is activated,
and ready to use.
If the LED around the microphone button changes between red and yellow for 5 seconds,
the wireless discussion unit cannot find the subscribed wireless network. If the wireless
network is found within 5 seconds, the wireless discussion unit connects. If not, the
wireless discussion unit automatically deactivates.
Operation Manual
Conference System
Bosch Security Systems B.V.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents