Bosch DCN Next Generation Operation Manual page 138

138 en | Connection
6.18 DCN-FCS Channel Selector
Connect the channel selector to the DCN with the DCN cable. You can use the DCN socket to
make a loop-through with the channel selector.
External headphones socket
You can connect an external headphones socket to the channel selector (e.g. a 6.3 mm
headphones socket). The external headphones socket must be connected to a plug or to
solder pads.
Figure 6.37: External headphones, connection (1)
Figure 6.38: External headphones, connection (2)
The solder pads and the plug are internally connected.
2013.11 | V2.0 | DCN-NG_OM_V4.x
X18 X17 X16
3 2 1
Operation Manual
Conference System
Bosch Security Systems B.V.