Bosch DCN Next Generation Operation Manual page 224

224 en | Configuration Conference System
If a language is set to a channel, an asterisk appears in the display. For example:
Menu g
Menu g sets a channel number to output A. The channel number must be available on the
interpreter desk. It is necessary to set each interpreter desk in turn.
Notice!
When you install the interpreter desk for the first time, the interpreter booth number is the
default channel number for output A.
Menu h
Menu h sets a channel to output B of the interpreter desk. It is necessary to set each
interpreter desk in turn. Output B can be set either for none or all available channels.
Menu j
Menu j sets the number of auto-relay interpreter booths in the system. The number is set for
all interpreter desks in the system.
Menu k
Menu k sets the interpreter booths that are auto-relay booths. The interpreter booths are set
for all interpreter desks in the system.
Menu l
Menu l sets the necessary interlock mode. The interlock mode is set for all interpreter desks in
the system.
2013.11 | V2.0 | DCN-NG_OM_V4.x Operation Manual Bosch Security Systems B.V.