Bosch DCN Next Generation Operation Manual page 135

Conference System
6.13 DCN-FMIC Microphone Connection Panel
A cable with a 6-pole CT plug and an 8-pole DIN plug is supplied with the panel. Use this cable
to connect the panel to a DCN-DDI Dual Delegate Interface.
When you use a microphone connection panel with a DCN-FCS channel selector, connect the
output level plug of the microphone connection panel to the level reduction plug of the
channel selector. This prevents acoustic feedback.
Figure 6.32: Output level plug, connection
DCN-FMIC
Figure 6.33: Channel selector, connection
When the microphone that is connected to the microphone connection panel is enabled, the
channel selector automatically decreases the volume level of the signal that is sent to the
headphones of the channel selector.
Notice!
You can connect, for example, an AMP173977-2 socket to the output level plug of the
microphone connection panel.
6.14 DCN-FMICB Microphone Control Panel
A Cat-4 cable with RJ11 plugs is supplied with the microphone connection panel. Use this
cable to connect the panel to the DCN-DDI Dual Delegate Interface or DCN-FV(CRD) Voting
Panel.
6.15 DCN-FPRIOB Priority Panel
A Cat-4 cable with RJ11 plugs is supplied with the priority panel. Use this cable to connect the
panel to the DCN-DDI Dual Delegate Interface.
6.16 DCN-FLSP Loudspeaker Panel
A cable with a 3.5 mm plug is supplied with the loudspeaker panel. Use this cable to connect
the panel to the DCN-DDI Dual Delegate Interface.
6.17 DCN-FV(CRD) Voting Panel
A Cat-4 cable with RJ11 plugs is supplied with the panel. Use this cable to connect the panel
to the DCN-DDI Dual Delegate Interface.
Bosch Security Systems B.V.
2 1
1
2
1
2
DCN-FCS
Operation Manual
Connection | en 135
2013.11 | V2.0 | DCN-NG_OM_V4.x