Toshiba GR200 Series Instruction Manual page 669

Line differential protection ied

Hide thumbs Also See for GR200 Series:

Table of Contents

Receiving "operate command Off" from the local-end

Figure 4.1-25 depicts the reception of the operate command for 'Off ' from the local-end.

Wait for a command

Select stage

Select command On from the remote-end

Select command Off from the remote-end

Select command On from the local-end

Select command Off from the local-end

Select command On by the PLC function

Select command Off by the PLC function

Figure 4.1-25 Outline of operate command 'Off'

Input signal generated at the local-end.

Figure 4.1-26 illustrates the operate logic when an "Operate command Off (Local-OFF-Control)"

signal is applied to the SPOS01 function. The input signal is generated when "Execution for

Off" is keyed on the IED front panel.

Wait for a next command

Operate command On from remote-end

Operate command Off from remote-end

Operate command On from the local-end

Operate command Off from the local-end

Operate logic

Signal reception from

the front panel

Operate command On by the PLC function

Operate command Off by the PLC function

6F2S1914 (0.49)

Signal output

GRL200 (Soft 033 & 037)

Chapters

Table of Contents