Toshiba GR200 Series Instruction Manual page 929

Note: In the table above, the user will only find Element IDs and their names for the 1
device, but a 2
nd
omitted the Element IDs and their names for the other devices to improve
readability. Use the rule described below when the user wishes to obtain the
Element IDs and their names for the other devices.
Rule: The same types of signal monitoring points are provided in every device; hence, the
user can find the same ones for all of the other devices. For example, when the user
wishes to find the "DPOS02A_FLT_DET" point provided for the 2nd device, use the
description of "DPOS01A_FLT_DET". The user can obtain the ID value of
"DPOS02A_FLT_DET" by using the following steps:
Step 1 Find the element ID for DPOS01A_FLT_DET (i.e., "8303011F49")
Step 2 Identify the numbers at the fifth and sixth digit from the ID. (i.e.,
"01")
Step 3 Choose a new device number. (i.e., pick the number "2" for the 2
device)
Step 4 Replace the sixth and fifth digit numbers with the new device
number. (i.e., get new ID "8303021F49" of "DPOS02A_FLT_DET") The
ID is expressed in hexadecimal notation. Thus, the user must change
the device number from decimal notation to hexadecimal notation.
and other devices are also provided in the DPOS function. We have
- 906 -
6F2S1914 (0.49)
st
nd
GRL200 (Soft 033 & 037)