Toshiba GR200 Series Instruction Manual page 664

Line differential protection ied

Hide thumbs Also See for GR200 Series:

Table of Contents

§§Note: The "SPOS01_OEX-BO" signal is issued when Fixlogic is set for scheme switch

[SPOS01-LGCFEXOT]. The "Operate completed "signal can also be issued from

logic programmed by the user, in place of the logic shown in Figure 4.1-20. The

user-programmed logic is connected internally to the signal "Operate completed",

hence this signal is now generated by the user-programmed logic at connection

point # 2 "user-configurable condition". That is, set the scheme switch [SPOS01-

LGCFEXOT] to PLC and use "SPOS01IN_TMP_42".

Output signal to BO

The SPOS01 function, in Figure 4.1-20, can issue an "Operate" signal at the output point

"SPOS01_OEX_BO", when the SPOS01 function determines that the received signal "Remote-

On-Control" is true.

6F2S1914 (0.49)

GRL200 (Soft 033 & 037)

Chapters

Table of Contents