Zoom Format, X-Iris Closed; Zoom Format, X-Iris Open; Save Values And End Adjustment; Concluding Tasks - Siemens SIREMOBIL Iso-C Troubleshooting Manual

Adjustments / Programs
Use the keys for opening and closing the X-Iris to set the diameter of the superimposed
circle to the size of the X-Iris.
In the "Available Functions:" window select "Close Pos - II. Full Format" and click "Exe-
cute".
Close the status window by clicking the OK button.
For the query "Do you want to reset the unit", click "No".
The X-Iris remains in the minimum position.
Zoom format is automatically selected.

Zoom format, X-Iris closed

X
Briefly release fluoro. The X-Iris is displayed on the monitor.
Use the keys for opening and closing the X-Iris to set the diameter of the superimposed
circle to the size of the X-Iris.
In the "Available Functions:" window select "Close Pos - II. Zoom Format" and click
"Execute".
Close the status window by clicking the OK button.
For the query "Do you want to reset the unit" click "No".
The X-Iris is opened automatically.
Zoom format remains selected.

Zoom format, X-Iris open

X
Briefly release fluoro. The X-Iris is displayed on the monitor.
Use the keys for opening and closing the X-Iris to set the diameter of the superimposed
circle to the size of the X-Iris.
In the "Available Functions:" window select "Open Pos - II. Zoom Format and click "Exe-
cute".
Close the status window by clicking the OK button.
For the query "Do you want to reset the unit", click "No".

Save values and end adjustment

In the "Available Functions:" window select "INIT OFF & STORE VALUES" and click
"Execute".
Close the status window by clicking the OK button.
For the query "Do you want to reset the unit", click "Yes".

Concluding tasks

Before ending the service program, save the new parameter values to disk (Service PC,
Data menu, Backup).
© Siemens, 2008
For internal use only
SPR2-230.840.01.01.02
08.08
Page 57 of 148
CS PS SP
57
0
0
0
0
SIREMOBIL Iso-C