Vertical Lift Brake - Siemens SIREMOBIL Iso-C Troubleshooting Manual

140

Vertical lift brake

Fig. 55:
WARNING
Remove the basic unit cover.
Carefully place the SIREMOBIL Iso-C on its side.
Remove plug D30.X8 and eject the contacts.
Remove the three attachment screws for the vertical lift brake and replace the brake.
Remove plug D30.X8.
Eject the contacts from plug D30.X8.
Route the wires of the new vertical lift brake to board D30 and insert the contacts into
the plug housing.
SIREMOBIL Iso-C
Risk of injury!
Noncompliance can lead to medium to severe injuries and/or
property damage.
To replace the vertical lift brake, the SIREMOBIL Iso-C
must be placed on its side. This requires 6 people. To
prevent damage to the SIREMOBIL Iso-C or the floor,
we recommend using several wool blankets or corru-
gated cardboard or other suitable floor covering.
SPR2-230.840.01.01.02
08.08
Brakes / Movements
Fig. 56:
Page 140 of 148
CS PS SP
7.3
© Siemens, 2008
For internal use only