Control Board D1, Host - Siemens SIREMOBIL Iso-C Troubleshooting Manual

32
4-

Control board D1, host

4Loading the operating software
Connect the service PC to the serial service interface on SIREMOBIL Iso-C.
Start the service program.
Insert the "Parameter" diskette into drive A.
Select the Download menu and start the download (ARC / Fil / Host).
After successfully downloading, wait for the system to boot (1 minute).
The SIREMOBIL Iso-C is operational.
NOTE
SIREMOBIL Iso-C
Loading the operating software
If you cannot run download (e.g. power failure during down-
load):
Switch the SIREMOBIL Iso-C off and back on.
Restart download.
SPR2-230.840.01.01.02
08.08
Page 32 of 148
CS PS SP
0
© Siemens, 2008
For internal use only