Power Supply M13, +13 V Videomed Dc - Siemens SIREMOBIL Iso-C Troubleshooting Manual
Hide thumbs
Also See for SIREMOBIL Iso-C:
- Service instructions manual (128 pages) ,
- Maintenance instruction (46 pages) ,
- Installation and setting instructions manual (6 pages)
Table of Contents
Advertisement
88
Power Supply M13, +13 V VIDEOMED DC
WARNING
Remove the Plexiglas cover over the power supply. Remove the 4 Allen screws.
Replace the power supply.
Check the power supply voltage and adjust it if necessary. See
ing voltages / p.
SIREMOBIL Iso-C
Replacing boards and components
Electrical voltage!
See
(Safety information / p.
Switch the system power supply off and disconnect the
power plug.
30).
SPR2-230.840.01.01.02
08.08
11).
(Checking the operat-
Page 88 of 148
CS PS SP
6.7
© Siemens, 2008
For internal use only
Advertisement
Table of Contents
