HP 16600A Series User Manual page 285

Glossary
corresponding odd and even logic
analyzer pod cables.
High-Density Termination
Adapter Cable Same as a High-
Density Adapter Cable, except it has
a termination in the Mictor
connector.
Jumper Moveable direct electrical
connection between two points.
Mainframe Logic Analyzer A logic
analyzer that resides on one or more
board assemblies installed in an
HP16500, HP1660-series, or
HP16600A/700A-series mainframe.
Male-to-male Header A board
assembly that makes point-to-point
connections between the female pins
of a flexible adapter or transition
board and the female pins of an
analysis probe.
Preprocessor See Analysis Probe.
Preprocessor Interface See
Analysis Probe.
Probe adapter See Elastomeric
Probe Adapter.
Processor Probe See Emulation
Probe.
Prototype Analyzer The HP16505A
284
prototype analyzer acts as an analysis
and display processor for the
HP16500B/C logic analysis system. It
provides a windowed interface and
powerful analysis capabilities.
Replaced by HP16600A/700A-series
logic analysis systems.
Run Control Probe See Emulation
Probe and Emulation Module.
Setup Assistant A software
program that guides a user through
the process of connecting and
configuring a logic analyzer to make
measurements on a specific
microcontroller.
Shunt Connector. See Jumper.
Software Probe See Emulation
Probe.
Solution HP's term for a set of tools
for debugging your target system. A
solution includes probing, inverse
assembly, the HPB4620B Source
Correlation Tool Set, and an
emulation module.
Stand-alone Logic Analyzer A
standalone logic analyzer has a
predefined set of hardware
components which provide a specific
set of capabilities. It is designed to
perform logic analysis. A standalone
logic analyzer differs from a
Solutions for CPU32