Chapter 1: Overview
Analysis Probe
Minimum equipment required
For state and timing analysis of a Motorola CPU32 target system, you
need all of the following items.
• The HP E2480A Analysis Probe.
• Four HP E5346A high-density cables.
• A microcontroller-specific transition board.
• A QFP probe adapter kit for your specific microcontroller package.
• The probe adapter User's Guide, for connecting the probe adapter to the
target system.
• One of the logic analyzers listed on page page 23. The logic analyzer
software version requirements are listed on page 24.
The above is the minimum equipment required to make a measurement. If
you want to configure the analysis probe to reconstruct addresses, you
must also have an emulation module.
Additional equipment supported
Emulation module. The HP E2480A has a built-in connector for an
emulation module.
HP B4620B Source Correlation Tool Set. The analysis probe and
inverse assembler may be used with the HP B4620B Source Correlation
Tool Set.
22
Solutions for CPU32