HP 16600A Series User Manual page 184

To export the logic analysis system's display to
a PC
By exporting the logic analyzer's display, you can see and use the logic
analysis system's windows on the screen of your PC. To do this, you
must have telnet software and an X terminal emulator installed on your
computer. The following instructions use the Reflection X emulator
from WRQ, running on Windows 95, as an example.
1 On the PC, start the X terminal emulator software.
To start Reflection X, click the Reflection X Client Startup icon.
2 Start a telnet connection to the logic analysis system.
Log in as "hplogic".
For Reflection X, enter the following values in the Reflection X Client
Startup dialog:
a In the Host field, enter the LAN name or IP address of the
logic analysis system.
b In the User Name field, enter "hplogic".
c Leave the Password field blank.
d Leave the Command field blank.
e Click Run to start the connection.
The logic analysis system will open a Session Manager window on your
display.
3 In the Session Manager window, click Start Session on This
Display.
Solutions for CPU32
Chapter 8: Using the Emulator with a Debugger
Setting up Debugger Software
183