Figure 8-3
8.2.7
Activation/deactivation
Activation
The coupling of real axes to a curve table is activated through this command:
LEADON (<Following axis>, <Leading axis>, <n>)
with <n> =Number of the curve table
Activation is possible:
● In the part program
● in the definition of a synchronous action
Example:
...
N1000 LEADON(A,X,3)
...
Deactivation
The switch off of the coupling to a curve table takes place through the following command:
LEADON (<Following axis>, <Leading axis>)
Special functions
Function Manual, 01/2015, 6FC5397-2BP40-5BA2
Determining the minimum and maximum values of the table
; Axis A follows the master value X according to the rule
of motions defined in Curve Table No. 3
M3: Coupled axes
8.2 Curve tables - 840D sl only
321