W5: 3D tool radius compensation - 840D sl only
23.1 Brief description
Circumferential milling, face milling
The following diagram shows the differences between 2
circumferential milling operations.
Figure 23-1
The parameters for display in the "Face milling" screen are described in detail in Chapter "Face
milling (Page 785)".
Figure 23-2
772
21/2D and 3D tool radius compensation
Face milling
/
D and 3D TRC with respect to
1
2
Function Manual, 01/2015, 6FC5397-2BP40-5BA2
Special functions