Np_D_Level - Siemens SINUMERIK 840D sl Function Manual

K8: Geometric machine modeling - only 840D sl
6.2 Commissioning
Example
The 19th protection area is to be displayed half transparent and in a green-blue color on the
user interface:
● AA = 7F
● RR (red) = 00 ≙ no red component
● GG (green) = FF
● BB (blue) = 33
Program code
N100 $NP_COLOR[18] = 'H7F00FF33'
6.2.4.6

$NP_D_LEVEL

Function
The detail level as of which the protection area element is displayed on the user interface is
specified via the system variable. If no value different from the default value is assigned for a
protection area element the protection area-specific value takes effect
$NP_PROT_D_LEVEL (Page 227).
Detail level
● Lowest detail level: 0
● Highest detail level: 3
If the detail level x is selected for the visualization of the machine model, all protection areas
and protection area elements are displayed for which the following applies for the detail level
D: D ≤ x
Syntax
$NP_D_LEVEL[<n>] = <name>
Meaning
$NP_PROT_D_LEVEL:
238
= 127 ≙ 50% transparency
H D
= 255 ≙ 100% green color component
H D
= 51 ≙ 20% blue color component
H D
Detail level for the protection area element
Data type:
Range of val‐
ues:
Default value:
Comment
; 19. Protection area,
; alpha/transparency and color
value = 'H7F00FF33'
INT
0 ≤ D ≤ 3
0
Function Manual, 01/2015, 6FC5397-2BP40-5BA2
Special functions