Activation/Deactivation - Siemens SINUMERIK 840D Operator's Manual

1
03.04
1.3

Activation/deactivation

Activation
Deactivation
Ó Siemens AG, 2004. All rights reserved
SINUMERIK 840D/840Di/810D Operator's Guide HMI Advanced (BAD) – 03.04 Edition
Function
A variety of methods can be employed to switch on the power supply
to the control system or to the whole plant.
Machine manufacturer
Please follow the machine manufacturer's instructions!
After the control has been switched on, the "Reference point
approach" display or another basic display programmed by the
machine manufacturer will appear.
Machine
Channel Reset
Program aborted
MKS Position.Repos-Versch.
MCS Position
-X 0.000 mm
+X900.000mm0.000 + X 900.000 mm 0.000
+Y 0.000 mm
- Y -Y-156.000mm0.000 -156.000 mm 0.000
+ Z +Z230.000mm0.000 +Z 230.000 mm 0.000 mm 0.000
+ 0.000 mm
Please follow the instructions for switching off the control or the entire
system!
Machine manufacturer
Please follow the machine manufacturer's instructions!
1.3 Activation/deactivation
Jog
Master spindle
Act. + 0.000 rev./min
Set 0.000 rev./min
Pos. 0.000 deg.
0.000 %
Power [%\
Feedrate mm/min
Act. 0.000 0.000 %
Set 0.000
Tool
preselected tool :
G0 G91
1
Introduction
S1
REF
1-25