Iti (Message Type I); Link Test (Message Type <Tab>) - Bosch Conettix D6600 Manual

Conettix D6600/D6100IPv6/D6100i | Computer Interface Manual | 3.0 Computer Communication
Protocols

3.2.14 ITI (Message Type I)

ITI Example SIA Mode Description
<LF><CRC><I><sequence#><receiver#><line#>[#aaaaa|GIZZEWN]<CR>
Table 67: ITI (Message Type I) Byte Description
Title
LF
CRC
Message Type
sequence#
receiver#
line#
(Line/Group #)
account#
G
I
ZZ
E
W
N
3.2.15 Link Test (Message Type <TAB>)
Link Test SIA Mode Description
Example
<LF><CRC><TAB><sequence#><receiver#> []<CR>
The D6600/D6100IPv6/D6100i can automatically generate this message at the preprogrammed
intervals.
Table 68: Link Test (Message Type <TAB>) Description
Title
LF
CRC
Message Type
sequence#
receiver#
60 Bosch Security Systems, Inc. | 2012.09 | 4998122703-05
Description
Standard line feed character.
Cyclical redundancy check number.
I (Captial I).
The message sequence number. The valid sequence number range is 0001
to 9999.
The receiver gateway that sent the message. Valid digits are 01 to 99 for
the D6600/D6100/D6100IPv6.
The line number of the line in the receiver gateway that sent the message.
Valid digits are 00 to 99. The receiver uses Line 0 (zero) for internal
messages.
The communicator's account number has up to six digits.
Group number.
O/C User ID.
Zone number.
Condition code.
Protection level was.
Protection level now.
Description
Standard line feed character.
Cyclical redundancy check number.
<TAB>
The message sequence number. The valid sequence number range is 0001
to 9999.
The receiver gateway that sent the message. Valid digits are 01 to 99 for
the D6600/D6100/D6100IPv6.