Common Formats (Message Type 1) - Bosch Conettix D6600 Manual

Conettix D6600/D6100IPv6/D6100i | Computer Interface Manual | 3.0 Computer Communication
Protocols

3.1.10 Common Formats (Message Type 1)

Type 1 D6500 Byte Description
Example
1 2
h l
Table 12: Common Formats (Message Type 1) Byte Description
# Title
1 Header Character
(h)
2 Message Type
3-4 Receiver Number
5 Line Number
6-15 Account Number
16-17 Event Code
18-21 Zone Number
22 Trailer Character
The receiver gateway sends the 3-1, 4-1, 4-2, single round, double round, extended pulse formats,
BFSK, Modem II or Modem IId messages in either D6500 Mode or SIA Mode, depending on the
programmable option selected. The receiver gateway also sends internal and ModemIIIa² messages in
either D6500 mode or SIA mode, depending on the option selected. Refer to Appendix B: Internal
Messages and Appendix C:
16 Bosch Security Systems, Inc. | 2012.09 | 4998122703-05
3 4 5 6 7 8
r r l a a a
Description
Optional. Check with the computer automation software for
compatibility.
1
Receiver gateway number from 01 to 99.
Line number in the receiver gateway that sent the message.
Account number, up to ten digits. Account numbers less than ten
characters are right aligned with leading ASCII spaces.
Event codes define the type of signal received and interpreted by the
D6500 receiver gateway.
Zone or ID number sent by the communicator. Zone numbers less
than four digits are right aligned with leading ASCII spaces.
Typically, this is HEX 14.
Modem4/ModemIIIa²
9 10 11 12 13 14 15 16 17 18 19 20 21 22
a a a a a a
for a list of the messages and their descriptions.
a E E y y y y t