Ademco 4-1 Express (Message Type B) - Bosch Conettix D6600 Manual

Conettix D6600/D6100IPv6/D6100i | Computer Interface Manual | 3.0 Computer Communication
Protocols
.
3.2.4

Ademco 4-1 Express (Message Type b)

4-1 Express SIA Mode Description
Example
<LF><CRC><b><sequence#><receiver#><line#>[#aaaa|X]<CR>
Table 47: Ademco 4-1 Express (Message Type b) Byte Description
Title
LF
CRC
Message Type
sequence#
receiver#
line#
(Line/Group #)
account#
X
Figure 10: Message sent to printer
mm/ddshh:mmsLxxsE41sACCTsaaaasEVENT=X
For lines that are grouped, Gxx appears instead of Lxx.
Table 48: Ademco 4-1 Express (Message Type b) Printer Output
Characters Description
E41 Ademco 4-1 Express format.
Lxx: Line number.
Gxx Grouped line numbers.
Bosch Security Systems, Inc. | 2012.09 | 4998122703-05
Description
Standard line feed character.
Cyclical redundancy check number.
b
The message sequence number. The valid sequence number range is
0001 to 9999.
The receiver gateway that sent the message. Valid digits are 01 to 99 for
the D6600/D6100/D6100IPv6.
The line number of the line in the receiver gateway that sent the
message. Valid digits are 00 to 99. The receiver uses Line 0 (zero) for
internal messages.
The communicator's account number has four digits.
Zone number
47