Assigning A Password - Siemens SINAMICS S120 Function Manual

7.30.3.2

Assigning a password

Requirement
The configuration dialog box for the Web server has been opened in STARTER and the Web
server is activated (see Basic configuration (Page 431)).
Figure 7-27
During the first commissioning, the password can also be assigned via the Web server
("Setup" display area). The procedure is identical to the password assignment in STARTER.
Enabling users
The "SINAMICS" and "Administrator" users can be enabled with their specific rights. It is also
possible to specify whether a password protection should be active for the "SINAMICS" user.
Default settings:
● SINAMICS: No password protection
It is recommended that a password is assigned. This must comprise at least 8 characters.
● Administrator: Password protection (password is not pre-selected.
A password with at least 8 characters must be assigned. If no password has been
assigned, the following warning appears when attempting to login "A09000: Web server
security: Administrator password not set".
Drive functions
Function Manual, 11/2017, 6SL3097-4AB00-0BP5
Configuring the Web server with default settings
Basic functions
7.30 Web server
433