Siemens SINAMICS S120 Function Manual page 218

Vector control
5.2 Vector control without encoder (SLVC)
Function diagrams (see SINAMICS S120/S150 List Manual)
• 6030
• 6730
• 6731
• 6792
Overview of important parameters (see SINAMICS S120/S150 List Manual)
• p0305[0...n]
• r0331[0...n]
• p0500
• p1300[0...n]
• p1574[0...n]
• p1610[0...n]
• p1611[0...n]
• p1750[0...n]
• p1755[0...n]
• p1756
• p1758[0...n]
• p1802[0...n]
• p1803[0...n]
218
Vector control - Speed setpoint, droop
Vector control - Interface to Motor Module (ASM, p0300 = 1)
Vector control - interface to the Motor Module (PMSM, p0300 = 2)
Vector control - Interface to the Motor Module (RESM, p0300 = 6)
Rated motor current
Actual motor magnetizing current / short-circuit current
Technology application
Open-loop/closed-loop control operating mode
Dynamic voltage reserve
Torque setpoint static (without encoder)
Supplementary acceleration torque (without encoder)
Motor model configuration
Motor model changeover speed encoderless operation
Motor model changeover speed encoderless operation
Motor model changeover delay time, closed/open-loop control
Modulator mode
Maximum modulation depth
Function Manual, 11/2017, 6SL3097-4AB00-0BP5
Drive functions