Advertisement
Page
Ver.
Item
Others2
F Tally RVS
CHAR CAM No. 1,2,3 , A,B,C
WHT Setup
Mode
AW Shading
Mode
Talk Priority
Canon U-4
Mode
W Gain
Sensitivity
BKP-5090
Settings
Contents
[On], Off
Selects the operation mode of TALLY lamps corresponding to a CALL
button pressed when a TALLY signal is input to the camera from CCU
or VTR.
On : Red TALLY lamps of VF and UP TALLY lamps of VF and
Off : Red TALLY lamps of VF alone go out.
Selects the indication mode of the camera number set by the CAMERA
ID. page of Operation menu.
1, 2, 3 : Indicates in numerics.
A, B, C : Indicates camera numbers 1 to 27 in alphabetical order of A to Z.
(When connecting 28 or more cameras, select "1,2,3".)
[AWB], LEVEL
AWB : After executing the Auto Level, white balance adjustment
LEVEL : After executing the Auto Level, white balance adjustment
[RGB], RB Only
RGB
RB Only : When automatically adjusting the white balance, R and B
[TALK|1], TALK 2
(Does not function in the unit.)
On, [Off]
(Does not function in the unit.)
On, [Off]
Turn the function on and off to select up to 36 dB master gain for each
gain switch position (LOW, MIDDLE, HIGH) of RM-P9 when the
standalone unit is installed in the unit
(This function is sometimes not activated depending on the type of OHB
which is incorporated in the camera.)
[0], 6 dB
0: Normal mode
6: Select only when the gain is raised by 6 dB on the spot
camera go out.
data returns to the value before execution.
data changes to the value after the white balance is adjusted
using Test 2 signal.
: When automatically adjusting the white balance, R, G, and
B signal waveforms are all flattened.
signal waveforms are flattened.
4-1. Setup Menu (BVP-500 series)
4-1-6. System Config Menu
4-19 (E)
Advertisement
