Advertisement
3-1. Setup Menu (BVP-550 series)
3-1-4. Reference File Menu
3-1-5. Trimming File Menu
3-1-4. Reference File Menu
The Reference File menu stores the reference values used for automatic setup adjustment and the standard
settings of the switches as the reference files. And the menu can clear the current reference files.
The Reference File menu is not normally accessible. To display this menu, switch setting of the AT-126
board is required.
To activate the Reference File menu, first display the TOP menu.
m
1. Executing the File Store on the Reference File page registers settings of items, which have been set
through the Paint, Maintenance and System config menus just before the file store, as the reference
values.
2. When changed numbers of items are returned to the reference values stored as the reference files,
recall the standard file using an MSU/RCP or the setup menu.
Page
Ver.
Item
Reference
File Store
File
Clear File
p)
If the power is turned off without execution of the File Store after clearing the file, the original setting is restored.
3-1-5. Trimming File Menu
The Trimming File menu stores the adjustment data in replacing parts as the trimming files. And the
menu can clear the current adjustment values. The Trimming File menu is not normally accessible.
To display this menu, switch setting of the AT-126 board is required.
To activate the Trimming File menu, first display the TOP menu.
n
Executing the File Store on the Trimming File page registers settings of items, which have been set
through the Maintenance and System config menus just before the file store, as the reference values.
Page
Ver.
Item
Trimming
File Store
File
Clear File
OHB File
File Store
Lens File
Lens File
Store
Select
Current
Lens
Reset All
Lens
p)
If the power is turned off without execution of the File Store after clearing the file, the original setting is restored.
3-14 (E)
Settings
Contents
Press MENU SEL
Stores the adjustment value on each item as the reference value.
switch twice to execute.
Press MENU SEL
Clears the adjustment values stored as the reference files.
switch to execute.
(Temporarily clears the current reference files
Settings
Contents
Press MENU SEL
Stores the adjustment value on each item as the reference value.
switch twice to execute.
Press MENU SEL
Clears the adjustment values stored as the triming files.
switch to execute.
(Temporarily clears the current triming files
Press MENU SEL
Stores specific data for a CCD unit to be used as the OHB files.
switch twice to execute.
The standard values are stored at the factory.
(Stores the offset value, OHB matrix data and so on.)
Press MENU SEL
Stores specific data for a lens to be used as the lens files.
switch to execute.
The standard values are stored at the factory.
[0] to 49
Loads a lens data into the lens file selected at present by the Lens
File page of the Operation menu.
Press MENU SEL
Resets all of 16 lens files.
switch to execute.
(Example) No. : 1
← Lens stored number (0 to 49)
← Lens name
Lens : 25 : A8.5 x 5.5
← Lens extender value
EX : 1.0
p)
.)
p)
.)
BKP-5090
Advertisement
